I am attempting to add NOx emissions to an already existing model, DemoS_002. I created a new sector that tracks CO2 emissions from coal used in Industry. I added CO2 and NOX as commodities in the ~FI_COMM table and an emissions factor in the ~FI_T table as well (See screen shot). I have also tried declaring NOX as a commodity via the VEDA_FE drop down menu but had some problems.
The model runs to completion but I do not see the NOx emissions in VEDA_BE. I think that I am doing something incorrectly in VEDA_FE but I am a little bit stuck on what to do after reading through the supporting documents.
the VEDA table seems right, are you sure the model is using one of these two technologies? Could you upload a screenshot of the VEDA-BE table for these technologies?
(31-05-2017, 11:57 AM)Hi Maurizio,Thank you for your message. Here is a screen shot of the VEDA BE table. It looks like the technologies are being used to me. The only inputs that I specify for the Industry Sector are new and existing coal (in the table the results are in the row "mr_coa_nox2". To try to test this method of adding NOx emissions further I also added NOx emissions to the transport sector. When I look at emissions by sector it only displays CO2 and unfortunately not NOx. Perhaps there is an option in VEDA BE I do not know about or something simple I am missing?I have attached a VEDA BE screen shot and the VEDA FE excel file with transport NOx added. Thank you so much for helping me,Mike Gargiulo Wrote: Hi Mike,
the VEDA table seems right, are you sure the model is using one of these two technologies? Could you upload a screenshot of the VEDA-BE table for these technologies?
(31-05-2017, 11:03 PM)I have also attached the excel document I am using. Even if I replace TRACO2 with TRANOX I still cannot find NOx emissions anywhere in VEDA BE.-Mike mbr1818 Wrote:
(31-05-2017, 11:57 AM)Hi Maurizio,Thank you for your message. Here is a screen shot of the VEDA BE table. It looks like the technologies are being used to me. The only inputs that I specify for the Industry Sector are new and existing coal (in the table the results are in the row "mr_coa_nox2". To try to test this method of adding NOx emissions further I also added NOx emissions to the transport sector. When I look at emissions by sector it only displays CO2 and unfortunately not NOx. Perhaps there is an option in VEDA BE I do not know about or something simple I am missing?I have attached a VEDA BE screen shot and the VEDA FE excel file with transport NOx added. Thank you so much for helping me,Mike Gargiulo Wrote: Hi Mike,
the VEDA table seems right, are you sure the model is using one of these two technologies? Could you upload a screenshot of the VEDA-BE table for these technologies?
I think I found my mistake! I have to go into the commodity tab in VEDA BE and add the NOx commodities to be displayed in the emissions by sector table!
