Veda2.0 Released!


Issues with Model Sync and Run after adding new processes
#1
Hi, I have been modifying the Starter model and am trying to run the BAU scenario. However, I am facing issues after some recent modifications. Following is the error message from LST log after the "unexpected termination of run!"

**** Matrix error - lower bound > upper bound
VAR_ACT(India,2012,2012,EXPSUPCOALIG-1,ANNUAL)   (.LO, .L, .UP = 0, 0, -0.65867)
GAMS 25.0.3  r65947 Released Mar 21, 2018 WEX-WEI x86 64bit/MS Windows                                                                                                                                                                01/19/20 14:52:55 

This is after I tried removing the upper bound from EXPSUPCOALIG-1.

Also, for the new processes I added, mainly in the IND (Industry Base) sheet, the Primary commodity group is not getting assigned and I am getting the following message:

Process with no PCG/ActUnit:
Scenario ; Region ; Process ; PrimaryCG ; Activity Unit 

BASE ; India ; IMCOILFOIPH-X0 ;  ; PJ
BASE ; India ; IMCOILLPGPH-X0 ;  ; PJ
BASE ; India ; IMCTECH--X0 ;  ; PJ
BASE ; India ; IMMELCPH-X0 ;  ; PJ
BASE ; India ; IMMOILDSLPH-X0 ;  ; PJ
BASE ; India ; IMMOILFOIPH-X0 ;  ; PJ
BASE ; India ; IMMTECH--X0 ;  ; PJ
BASE ; India ; ITEELCPH-X0 ;  ; PJ
BASE ; India ; ITETECH--X0 ;  ; PJ
BASE ; India ; ITXCOALIGPH-X0 ;  ; PJ
BASE ; India ; ITXCOAOBCPH-X0 ;  ; PJ
BASE ; India ; ITXELCPH-X0 ;  ; PJ
BASE ; India ; ITXOILDSLPH-X0 ;  ; PJ
BASE ; India ; ITXOILFOIPH-X0 ;  ; PJ
BASE ; India ; ITXOILLPGPH-X0 ;  ; PJ
BASE ; India ; ITXTECH--X0 ;  ; PJ
BASE ; India ; IWPELCPH-X0 ;  ; PJ
BASE ; India ; IWPTECH--X0 ;  ; PJ
BASE ; India ; EECOACOG-TRT-X0 ;  ; PJ
BASE ; India ; IMCELCPH-X0 ;  ; PJ
BASE ; India ; IMCOILDSLPH-X0 ;  ; PJ
BASE ; India ; GRD-LTHC-1 ;  ; PJ
BASE ; India ; GRD-LTHC-2 ;  ; PJ
BASE ; India ; PREFREF-NC ;  ; PJ
BASE ; India ; CMENRG-X0 ;  ; PJ
BASE ; India ; ICNOILDSLPH-X0 ;  ; PJ
BASE ; India ; ICNTECH--X0 ;  ; PJ
NT-PWR ; India ; EECOACOG-TRT ;  ; PJ

Can anyone help with this issue?
Reply
#2
(19-01-2020, 03:02 PM)[email protected] Wrote: Hi, I have been modifying the Starter model and am trying to run the BAU scenario. However, I am facing issues after some recent modifications. Following is the error message from LST log after the "unexpected termination of run!"

**** Matrix error - lower bound > upper bound
VAR_ACT(India,2012,2012,EXPSUPCOALIG-1,ANNUAL)   (.LO, .L, .UP = 0, 0, -0.65867)
GAMS 25.0.3  r65947 Released Mar 21, 2018 WEX-WEI x86 64bit/MS Windows                                                                                                                                                                01/19/20 14:52:55 

This is after I tried removing the upper bound from EXPSUPCOALIG-1.

Also, for the new processes I added, mainly in the IND (Industry Base) sheet, the Primary commodity group is not getting assigned and I am getting the following message:

Process with no PCG/ActUnit:
Scenario ; Region ; Process ; PrimaryCG ; Activity Unit 

BASE ; India ; IMCOILFOIPH-X0 ;  ; PJ
BASE ; India ; IMCOILLPGPH-X0 ;  ; PJ
BASE ; India ; IMCTECH--X0 ;  ; PJ
BASE ; India ; IMMELCPH-X0 ;  ; PJ
BASE ; India ; IMMOILDSLPH-X0 ;  ; PJ
BASE ; India ; IMMOILFOIPH-X0 ;  ; PJ
BASE ; India ; IMMTECH--X0 ;  ; PJ
BASE ; India ; ITEELCPH-X0 ;  ; PJ
BASE ; India ; ITETECH--X0 ;  ; PJ
BASE ; India ; ITXCOALIGPH-X0 ;  ; PJ
BASE ; India ; ITXCOAOBCPH-X0 ;  ; PJ
BASE ; India ; ITXELCPH-X0 ;  ; PJ
BASE ; India ; ITXOILDSLPH-X0 ;  ; PJ
BASE ; India ; ITXOILFOIPH-X0 ;  ; PJ
BASE ; India ; ITXOILLPGPH-X0 ;  ; PJ
BASE ; India ; ITXTECH--X0 ;  ; PJ
BASE ; India ; IWPELCPH-X0 ;  ; PJ
BASE ; India ; IWPTECH--X0 ;  ; PJ
BASE ; India ; EECOACOG-TRT-X0 ;  ; PJ
BASE ; India ; IMCELCPH-X0 ;  ; PJ
BASE ; India ; IMCOILDSLPH-X0 ;  ; PJ
BASE ; India ; GRD-LTHC-1 ;  ; PJ
BASE ; India ; GRD-LTHC-2 ;  ; PJ
BASE ; India ; PREFREF-NC ;  ; PJ
BASE ; India ; CMENRG-X0 ;  ; PJ
BASE ; India ; ICNOILDSLPH-X0 ;  ; PJ
BASE ; India ; ICNTECH--X0 ;  ; PJ
NT-PWR ; India ; EECOACOG-TRT ;  ; PJ

Can anyone help with this issue?
g2
Reply
#3
(19-01-2020, 07:43 PM)Gary Wrote:
(19-01-2020, 03:02 PM)[email protected] Wrote: Hi, I have been modifying the Starter model and am trying to run the BAU scenario. However, I am facing issues after some recent modifications. Following is the error message from LST log after the "unexpected termination of run!"

**** Matrix error - lower bound > upper bound
VAR_ACT(India,2012,2012,EXPSUPCOALIG-1,ANNUAL)   (.LO, .L, .UP = 0, 0, -0.65867)
GAMS 25.0.3  r65947 Released Mar 21, 2018 WEX-WEI x86 64bit/MS Windows                                                                                                                                                                01/19/20 14:52:55 

This is after I tried removing the upper bound from EXPSUPCOALIG-1.

Also, for the new processes I added, mainly in the IND (Industry Base) sheet, the Primary commodity group is not getting assigned and I am getting the following message:

Process with no PCG/ActUnit:
Scenario ; Region ; Process ; PrimaryCG ; Activity Unit 

BASE ; India ; IMCOILFOIPH-X0 ;  ; PJ
BASE ; India ; IMCOILLPGPH-X0 ;  ; PJ
BASE ; India ; IMCTECH--X0 ;  ; PJ
BASE ; India ; IMMELCPH-X0 ;  ; PJ
BASE ; India ; IMMOILDSLPH-X0 ;  ; PJ
BASE ; India ; IMMOILFOIPH-X0 ;  ; PJ
BASE ; India ; IMMTECH--X0 ;  ; PJ
BASE ; India ; ITEELCPH-X0 ;  ; PJ
BASE ; India ; ITETECH--X0 ;  ; PJ
BASE ; India ; ITXCOALIGPH-X0 ;  ; PJ
BASE ; India ; ITXCOAOBCPH-X0 ;  ; PJ
BASE ; India ; ITXELCPH-X0 ;  ; PJ
BASE ; India ; ITXOILDSLPH-X0 ;  ; PJ
BASE ; India ; ITXOILFOIPH-X0 ;  ; PJ
BASE ; India ; ITXOILLPGPH-X0 ;  ; PJ
BASE ; India ; ITXTECH--X0 ;  ; PJ
BASE ; India ; IWPELCPH-X0 ;  ; PJ
BASE ; India ; IWPTECH--X0 ;  ; PJ
BASE ; India ; EECOACOG-TRT-X0 ;  ; PJ
BASE ; India ; IMCELCPH-X0 ;  ; PJ
BASE ; India ; IMCOILDSLPH-X0 ;  ; PJ
BASE ; India ; GRD-LTHC-1 ;  ; PJ
BASE ; India ; GRD-LTHC-2 ;  ; PJ
BASE ; India ; PREFREF-NC ;  ; PJ
BASE ; India ; CMENRG-X0 ;  ; PJ
BASE ; India ; ICNOILDSLPH-X0 ;  ; PJ
BASE ; India ; ICNTECH--X0 ;  ; PJ
NT-PWR ; India ; EECOACOG-TRT ;  ; PJ

Can anyone help with this issue?
Please ZIP/RAR & post your VEDA_Models\ folder in the ETSAP_VT-Starter\Support\Users Dropbox - https://www.dropbox.com/sh/s7g4a1knbxxv5...WQfGa?dl=0.
g2
Reply
#4
(19-01-2020, 07:51 PM)Gary Wrote:
(19-01-2020, 07:43 PM)Gary Wrote:
(19-01-2020, 03:02 PM)[email protected] Wrote: Hi, I have been modifying the Starter model and am trying to run the BAU scenario. However, I am facing issues after some recent modifications. Following is the error message from LST log after the "unexpected termination of run!"

**** Matrix error - lower bound > upper bound
VAR_ACT(India,2012,2012,EXPSUPCOALIG-1,ANNUAL)   (.LO, .L, .UP = 0, 0, -0.65867)
GAMS 25.0.3  r65947 Released Mar 21, 2018 WEX-WEI x86 64bit/MS Windows                                                                                                                                                                01/19/20 14:52:55 

This is after I tried removing the upper bound from EXPSUPCOALIG-1.

Also, for the new processes I added, mainly in the IND (Industry Base) sheet, the Primary commodity group is not getting assigned and I am getting the following message:

Process with no PCG/ActUnit:
Scenario ; Region ; Process ; PrimaryCG ; Activity Unit 

BASE ; India ; IMCOILFOIPH-X0 ;  ; PJ
BASE ; India ; IMCOILLPGPH-X0 ;  ; PJ
BASE ; India ; IMCTECH--X0 ;  ; PJ
BASE ; India ; IMMELCPH-X0 ;  ; PJ
BASE ; India ; IMMOILDSLPH-X0 ;  ; PJ
BASE ; India ; IMMOILFOIPH-X0 ;  ; PJ
BASE ; India ; IMMTECH--X0 ;  ; PJ
BASE ; India ; ITEELCPH-X0 ;  ; PJ
BASE ; India ; ITETECH--X0 ;  ; PJ
BASE ; India ; ITXCOALIGPH-X0 ;  ; PJ
BASE ; India ; ITXCOAOBCPH-X0 ;  ; PJ
BASE ; India ; ITXELCPH-X0 ;  ; PJ
BASE ; India ; ITXOILDSLPH-X0 ;  ; PJ
BASE ; India ; ITXOILFOIPH-X0 ;  ; PJ
BASE ; India ; ITXOILLPGPH-X0 ;  ; PJ
BASE ; India ; ITXTECH--X0 ;  ; PJ
BASE ; India ; IWPELCPH-X0 ;  ; PJ
BASE ; India ; IWPTECH--X0 ;  ; PJ
BASE ; India ; EECOACOG-TRT-X0 ;  ; PJ
BASE ; India ; IMCELCPH-X0 ;  ; PJ
BASE ; India ; IMCOILDSLPH-X0 ;  ; PJ
BASE ; India ; GRD-LTHC-1 ;  ; PJ
BASE ; India ; GRD-LTHC-2 ;  ; PJ
BASE ; India ; PREFREF-NC ;  ; PJ
BASE ; India ; CMENRG-X0 ;  ; PJ
BASE ; India ; ICNOILDSLPH-X0 ;  ; PJ
BASE ; India ; ICNTECH--X0 ;  ; PJ
NT-PWR ; India ; EECOACOG-TRT ;  ; PJ

Can anyone help with this issue?
Please ZIP/RAR & post your VEDA_Models\ folder in the ETSAP_VT-Starter\Support\Users Dropbox - https://www.dropbox.com/sh/s7g4a1knbxxv5...WQfGa?dl=0.

Thank you for your quick response. I clicked on the link but there is no option to upload the folder. Can I email it you?
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Model not generating sufficient electricity [email protected] 1 2,345 21-03-2021, 06:34 AM
Last Post: Antti-L

Forum Jump:


Users browsing this thread: 1 Guest(s)