CHANGE value

[JozefO]

Hello, i m thinking about future measures in Cement production and one of measure could be lower emission factor for material  process.  I have done emission factor by using PRCCOMEMI table, but it is possible to change value by using scenario file ? 

Please see attached.

Thank you guys.

[AKanudia]

sure, you can set up a ~TFM_UPD table in a scenario file with attribute=FLO_EMIS, PSET_PN=IISFINPRO-150, CSET_CN=CO2*. write the value you want under allregions.

note that use of ~COMEMI and ~PROCCOMEMI tables is not recommended. you should use attributes VDA_EMCB and FLO_EMIS, respectively, in regular FI_T or INS/DINS tables.

[JozefO]

sure, you can set up a ~TFM_UPD table in a scenario file with attribute=FLO_EMIS, PSET_PN=IISFINPRO-150, CSET_CN=CO2*. write the value you want under allregions.

note that use of ~COMEMI and ~PROCCOMEMI tables is not recommended. you should use attributes VDA_EMCB and FLO_EMIS, respectively, in regular FI_T or INS/DINS tables.

Okey thank you Amit. I m using PROCCOMEMI table because it is very friendly-use for me now. But i will keep in mind that better is to use FLO_EMIS attribute.