Help modeling storage technologies

[Abdulaziz]

Hi,
I am attempting to introduce storage technologies to my model… mainly batteries, pumped heat, and possibly compressed air. I’m seeking help and guidance on how to proceed and putting my thoughts together.

Here is my situation so far:

1. I have solar and conventional electricity generation technologies. Initially I was considering storage for solar technologies only. I’m unsure at the moment if doing it this way would be an advantage or disadvantage. Appreciate your input.
   


2. Conventional electricity generation technologies options include cogeneration (electricity and water distillation). Water storage not considered at the moment.
   


3. Electricity is consumed by both electrical end-use technologies and reverse osmosis (RO) desalination technologies.
   


4. For electricity, time slice level is daynite. While for water its season.
   


5. The intention is to have the storage feed the grid for both end-use technologies and RO desalination. Your input will help me decide on whether to proceed this way or have batteries only feed the electricity end-use technologies leaving out RO.
   


6. The flow fraction for is different for each end-use technology.
   

Attached is the sheet constructed so far. I have searched the forum and read the documentation… I know there are missing pieces, but not sure where or how to proceed.

I truly appreciate your tips and guidance.